Wireless transmitter with a cable gland for external Pt100 and Pt1000 sensors.

This measuring module has an M12-sized grommet sleeve for the sensor cable. Sensor connector J4 is located on the circuit board of the measuring module inside the enclosure.

The two-part design of the transmitter allows uninterrupted calibration changes for the measuring module.

Product code: 94306

Ask for an offer
User Manual
  • To an external temperature sensor
  • Sensor type Pt, Ni, Cu resistive temperature sensors
  • Sensor cable length <3 m
  • Measuring range Pt100: -200…+600 °C Ni100: -60…+180 °C Cu: -200…+260 °C
  • Accuracy (4-wire) 0.05 %rdg +0.2 °C at 25 °C
  • Thermal drift 0.01 °C/°C comp. 25 °C
  • Operating temperature -30…+60 °C
  • Storage temperature: -40…+70 °C
  • Relative humidity <95 %RH, non-condensing
  • Protection class IP65 (modules together)
Power source
  • Battery 1.5 V, type LR6 (AA) alkaline battery, “heavy-duty”
FT10-RT433 radio transmitter
  • Type unlicensed 433.92 MHz ERC / REC / 70-03 sub-band f
  • Transmitting frequency 433.92 MHz ISM band
  • Transmitting power Max. +10 dBm E.R.P.
  • Open space range up to 1,000 m
  • Indoor range typically 50…100 m
  • Antenna Use only the supplied standard antenna
  • Compatible equipment Nokeval MTR, RTR, FTR, DPR and FT20 series 433.92 MHz radio receivers