Displays

Panel Meters

PM smart meter

PM smart meters combine many new innovations and good technical implementations of previous reliable Nokeval products. They can be configured to meet the requirements of every user. There are over 16 000 variations how to use the smart meters.

PM10

PM10 is a modular 8 channel panel meter for industrial usage. Selection of various input, output, relay and I/O cards available.

Features:

  • Serial RS485, Modbus RTU protocol
  • I/O-lines
  • The color of the display is adjustable
  • The display color can be made to change and flash in case of incident
  • Two channel reading is visible in the display simultaneously or with the channel number display
  • Versatile mathematical functions for channel or between channels
  • The maximum of 8 input channels, P100, thermocouples, 4-20 mA/0-10V, mV
  • The maximum of 8 output channels, outputs 4-20 mA, 0-10V
  • The outputs can follow inputs directly or processing, calculation, terms, thoughts, table linearization, totalization, taring or holding can be added between them.
  • The maximum of 6 alarm relays
  • The ability to lock the cards with the screws very tightly for vibration sensitive conditions
  • Power supply 24 VDC: 21…27 VDC
  • MicroUSB connector for MekuWin configuration with PC
PM20

PM20 is a modular 18 channel panel meter for industrial usage. Various input, output, relay and I/O option cards available. 
Features:

  • Power supply 24 VDC: 21…27 VDC
  • MicroUSB connector for MekuWin configuration with PC
  • Serial RS485, Modbus RTU protocol
  • I/O-lines
  • The color of the display is adjustable, multi-color alphanumeric 18-digit display
  • The display color can be made to change and flash when alarm happens
  • Six channel reading is visible in the display simultaneously or with the channel number display
  • Versatile mathematical functions for channel or between channels
  • The maximum of 18 input channels, P100, thermocouples, 4-20 mA/0-10V, mV
  • The maximum of 18 output channels, outputs 4-20 mA, 0-10V
  • The outputs can follow inputs directly or processing, calculation, terms, thoughts, table linearization, totalization, taring or holding can be added between them.
  • The maximum of 16 alarm relays
  • The ability to lock the cards with the screws very tightly for vibration sensitive conditions
PM10UNI2A

UNI2A is 2-channel measuring card of PM10 device for analog inputs. PM10 can hold 1-4 cards like this and the  number of the input channels of PM10 device is 2-8.

PM10OUT2A

OUT2A is 2-channel output card of PM10 device. PM10 can hold 1-4 cards like this and the number of the output channels is 2-8.

One card includes:

  • 2x mA output
  • 2x V output
  • 1x 15VDC output
  • 1x digital output or input (configured as either one)
PM10REL2A

REL2A is 2-relay alarm card of PM10 device.
PM10 can hold 1-4 cards like this and the number of the relays is 2-8.

PM10POW24SA

POW24SA is voltage card of PM10 device which also has a RS485 serial communicationEvery PM10 devicerequires one voltage supply card to operate and the serial communication function also included in the card can be used for example with DCS770 to connect PM10 to a computer.

One card includes:

  • 24VDC input
  • digital output or input (configured as either one)
  • RS485 input & output

2000 series

Panel meter includes three card slots, one for input card and two extra slots for output, alarm or serial card. By changing input card the meter can be altered for diverse sensors, e.g. pulse or scaling sensors. Optional 2-6 alarm relays, output 4…20 mA or serial card RS485. The meter can also feed to sensors 24 VDC, max 150 mA. 

 

2012

Versatile panel meter for process input mA/V and potentiometer.

2021

Universal analog input: Pt100 and thermocouples K, J, T, E, S/R,  mV, 0/4..20 mA, 0-5/10V, mV
Output: 0/4-20 mA, 0-10V, serial data RS485/232, 2-4 alarm relays

2041

Scaling sensor (strain gauge) input 4 x 350 ohm
Output: 0/4-20 mA, 0-10V, serial data RS485/232, 2 alarm relays

2051

Input: pulse sensors PNP, NPN, Namur, TTL and touch
Output: 0/4-20 mA, 0-10V, serial data RS485/232, 2 alarm relays

2061

Input: pulse sensors PNP, NPN, Namur, TTL and touch
Output: 0/4-20 mA, 0-10V, serial data RS485/232, 2 alarm relays

2071

Input: serial data RS232 or RS485

2081

Input: BCD, Gray- and Binary

2212

2 channel panel meter for process input mA/V and potentiometer. Optional 2-3 alarm relays,  output 4-20 mA or serial data card RS485.

PME series

Low cost panel meter for temperature and process inputs. Two alarm relays and output 4-20 mA are as standard. Special feature is wide range power supply 21..265 V AC or DC.

  • Pt100, thermocouple K, 0..20 mA, 4..20 mA, 0..10V, mV
  • Two alarm relays
  • Output 4-20 mA
  • One wide range power supply 21..265 V AC or DC.
  • 4 digits, red bright LED
  • Short enclosure 65 mm
  • Removable terminals
  • Front cover protection IP65

 

PME600

Input: Pt100, thermocouple K, 4…20 mA / 0…10V, mV
Two alarm relays and output 4-20 mA are as standard.

PME610

Input: Pt100, thermocouple K and 4…20 mA/0…10V.
Output: upper and lower boundary output 4…20 mA.

Loop powered panel meters

Loop powered  bright red LED-display 201 needs no external power supply. Current signal 4-20 mA provides the necessary energy. Therefore, it is possible to install the meter in places having no auxiliary power available. You can now replace the autopowered LCD-displays, having very poor visibility, by bright red LED-displays. There are two models: basic model 201 without alarms and model 202 with two alarm contacts.

Display scaling and configuration by front panel buttons. Unit has digital filter for stabilizing the 4-digit display. In model 202 You may configure two optional alarms, high and low. Password is settable for entering configuration and alarm stages.

201

Input: 4…20 mA, power is taken from the current signal.

202

Input: 4…20 mA, power is taken from the current signal.
Output: 2 alarm relays

Small Field Displays

301_305

300 series

Loop powered bright red LED-displays need no external power supply. Current signal 4-20 mA provides the necessary energy. Therefore, it is possible to install the meter in places having no auxiliary power available. You can now replace the autopowered LCD-displays, having very poor visibility, by bright red LED-displays. Display scaling and configuration by front panel buttons. Unit has digital filter for stabilizing the 4-digit display. Casing size 100 x 100 x 57 mm.

301

Input: 4…20 mA, power is taken from the current signal. Casing 100 x 100 x 57 mm.

302

Input: 4…20 mA, power is taken from the current signal.
Alarms: 2 alarm relays

305

Input: 4…20 mA, power is taken from the current signal. The casing is smaller than display 301, 80 x 80 x 60 mm. The casing has only one cable inlet.

311

Input: thermocouples, Pt100, mV, 0…20 mA, 4…20 mA, 0-5/10V.
Output: 2 wire 4…20 mA, power is taken from the output signal.

2800-2012

2800 series

The display has red 20 mm high LED numbers, which can be read up to 10m. The reading is displayed up to six numbers, fixed zeros at the end are plausible. The meter can be altered for various sensor types by switching the input card. The device may be furnished with 2000 series output card, 2 or 3 relays card, or serial data card. One device may include two input cards and count one mathematical operation e.g. average.

Switching the sensor does not require calibration, the sensor type is chosen and the display is scaled by using the buttons in front of the device. Supply voltage options 85…240 VAC or 12…32 VDC. The meter provides 24 V, up to 150 mA power feed to the sensor. Casing size 100 x 100 x 57 mm.

2800-2012

Process input: 4…20 mA, V, Ohm.

2800-2021

Temperature and process input: Pt100, thermocouples, 0/4…20 mA, 0-5, 0-10V, potentiometer
Output: 2 alarm relays, serial data RS485/232, 0/4-20 mA, 0-5, 0-10V

2800-2041

Input: strain gauge sensors 4 x 350 ohm
Output: 0/4-20 mA, 0-5/10V, serial data RS485/232, 2 alarm relays

2800-2051

Input: Frequency PNP, NPN, Namur, TTL, touch
Output: 0/4-20 mA, 0-5/10V, serial data RS485/232, 2 alarm relays

2800-2061

Input: pulse sensors PNP, NPN, Namur, TTL, touch
Output: 0/4-20 mA, 0-5/10V, serial data RS485/232, 2 alarm relays

2800-2071

Input: Serial data RS232 or RS485

2800-2081

Input: BCD, Gray and Binary

2800-2212

2 channel field display for process input

Large Field Displays

FD100 series

Four or six digits field display, digit size 100 mm. Visibility up to 50 metres. Display can also be used outdoors. FD100A4 has 4 digits and FD100A6 6 digits.

Choose right kind of display by its use.

 

FD100A4-2012

Process input 0/4…20 mA, Ohm, 0…10 V, 4 digits.

FD100A4-2021

Temperature and process input 0/4…20 mA, 0…10 V, potentiometer, 4 digits.

FD100A4-2041

Scaling sensors, input 4 or 6 conductors, 4 digits.

FD100A4-2051

Speed for pulse sensors, input PNP, NPN, Namur, TTL, touch, 4 digits.

FD100A4-2061

Adding pulse counter, input PNP, NPN, Namur, TTL, touch, 4 digits.

FD100A4-2071

Serial data, input RS485 or RS232, 4 digits.

FD100A6-2012

Process input 0/4…20 mA, Ohm, 0…10 V, 6 digits.

FD100A6-2061

Counter for pulse sensors, input pulse sensors PNP, NPN, Namur, TTL, touch, 6 digits.

FD200 series

Four or six digits field display, digit size 200 mm. Visibility up to 100 metres. Display can also be used outdoors. FD200A4 has 4 digits and FD200A6 6 digits.

Choose right kind of display by its use.

FD200A4-2012

Process input 0/4…20 mA, Ohm, 0…10 V, 4 digits.

FD200A4-2021

Temperature and process input 0/4…20 mA, 0…10 V, potentiometer, 4 digits.

FD200A4-2041

Scaling sensors, input 4 or 6 conductors, 4 digits.

FD200A4-2051

Speed for pulse sensors, input PNP, NPN, Namur, TTL, touch, 4 digits.

FD200A4-2061

Adding pulse counter, input PNP, NPN, Namur, TTL, touch, 4 digits.

FD200A4-2071

Serial data, input RS485 or RS232, 4 digits.

FD200A6-2012

Process input 0/4…20 mA, Ohm, 0…10 V, 6 digits.

FD200A6-2061

Counter for pulse sensors, input pulse sensors PNP, NPN, Namur, TTL, touch, 6 digits.

575F5 series

575F5 is wall mounted large field display, with five 57 mm high digits. The device can be configured depending on the model.

The device is available as 24VDC model, which operates at 20…32 VDC / 24 VAC voltage or 230VAC model, which operates 41…265 VAC/VDC voltage.

The device can be ordered or equipped later with 2000 series output card, 2 or 3 alarm relay card, serial data card or I/O card depending on the model.

The device is one channel, except in two channel models 575F5-2212 ja 575F5-2251 there are two input cards which if desired can calculate mathematical function between two channels such as average.

575F5-2012

Input: process 4…20 mA, V, Ohm. Casing size 100 x 100 x 57 mm.

575F5-2021

Input: temperature, process Pt100, thermocouples, 0/4-20 mA, 0-5, 0-10V, potentiometer
Output: 2 alarm relays, serial data RS485/232, 0/4-20 mA, 0-5, 0-10V

575F5-2041

Input: Scaling sensors (strain gauge sensors), 4 x 350 ohm
Output: 0/4-20 mA, 0-5/10V, serial data RS485/232, 2 alarm relays

575F5-2051

Input: pulse sensors PNP, NPN, Namur, TTL, touch
Output: 0/4-20 mA, 0-5/10V, serial data RS485/232, 2 alarm relays

575F5-2061

Input: pulse sensors PNP, NPN, Namur, TTL, touch
Output: 0/4-20 mA, 0-5/10V, serial data RS485/232, 2 alarm relays

575F5-2212

2 inputs: process 4…20 mA, V, Ohm. Casing size 100 x 100 x 57 mm.

Optional cards

Optional cards for series 2000, 2800, FD100, FD200 and 575F5. Add cards to have additional features to your display. For PM smart series, please find optional cards under the PM display selection.

2000-REL2 relay card

Alarm card with 2 relays, 260 VAC / 2 A

Relay Information: SPDT, 5 A, 250 VAC

Alarm Relays: 2

Connector Model: 2.5mm², detachable

2000-OUT

The analog output card provides one mA or V output signal. These can not b used simultaneously. The analog output card can be installed in slots B or C or both. An active mA output is provided in terminals 4 and 5-. Voltage output is in terminals 6 and 5-.

Output Channels: 1

Outputs: mA, V

Connector Model: 2.5mm², detachable

2000-RS

Serial communications card with RS-232 and RS-485 bus

Relay Information: SPDT, 5 A, 250 VAC

Alarm Relays: 2

Connector Model: 2.5mm², detachable

2000-I/O

4 digital inputs/outputs

Inputs: digital I/O
Input Channels: 4
Output Channels: 4
Special Functions: optional with inputs
Outputs: digital I/O

Connector Model: 2.5mm², detachable

2000-REL3

Alarm card with 3 relays, 260 VAC / 2 A

Relay Information: SPST, NO, 5 A, 250 VAC

Alarm Relays: 3

Plotters

Brainchild

The new PR series paperless recorders are launched in full product range with outstanding specifications and features. PR series includes a low-cost PR10, a popular PR20 and a high-end PR30. Compared with the first generation VR series, PR series offers much more, for example recorders in 4.3” & 12.1” displays in addition to 5.6”, 100 msec. sampling rate, external channels, batch, custom display, more strict FDA 21 CFR part 11, handwriting messages, SD slot, 2 USBs, pulse input, field calibration, Web Server, email, 19 languages, IP65, and yet in shorter depth 167mm. Available with 3, 6, 12, 18 or 24 channels.

  • Touch Screen, TFT, 65K color
  • 100 msec. scan rate
  • Internal memory: 256 MB Flash
  • CPU: ARM Cortex-A8, 1Ghz
  • Standard: Ethernet, SD slot & USB
  • Option: RS232/422/485 & Pulse input
  • Protection: IP65 front & IP20 rear
  • Standards: CE, cULus & RoHS
  • Pulse input for flow applications
  • Direct Printer connectivity
  • Webserver & Email directly from Recorder
  • Remote IO channels, Virtual channels
  • Master & Slave, Modbus RTU and TCP protocols
  • Custom display pages similar to HMI
  • Batch operations, built in security & FDA 21 CFR part 11
  • 19 international languages